How To Solve The Different Stripping Lengths When The Computer Wire Stripping Machine Is Working?

1. The adhesion of the wire is relatively large. When cutting and stripping, a large pulling force is required. Because of the problem of mechanical coordination, the length of cutting and stripping will be different; this depends on whether the stripping machine can effectively handle it. The wire harness I want to process has been reported by customers before that the stripped wires are not stripped well or cannot be stripped. The reason is that the wires that need to be stripped are not within the scope of application of the wire stripping machine, which leads to wire cutting and stripping. question.

2. Slipping: We know that in the process of cutting and stripping, it is necessary to press the wire with a belt or a pulley; when the wire harness is not fully compressed, the wire will shift under the tension of the blade, resulting in stripping and cutting The length is different, in this case, adjust the compression.

3. The pay-off frame has pulling force, which may be a situation that is easy to ignore; when asking about technology, he told me that when you pull a rope to the right, I pull it on the left , or even pull to the left, then your rope will naturally shift; this situation will occur when changing the wire or when there is a foreign object blocking the pay-off frame.