How To Maintain The Automatic Cutting Machine?

The cutting head is the core part of cutting and cutting, so we should focus on maintaining the cutting head. Check the degree of wear of the blade during cutting. When the degree of wear of the blade is too severe to meet the width set during cutting, it must be replaced in time. Use a soft cloth to clean the oil, and use compressed air to clean the dust on the cutter head and the pressure plate.

As the beam carrier for the movement of the cutter head, we also need to pay attention to maintenance. The method of detecting air leakage of the beam frame is generally detected by sealing the pressure plates on both sides of the X-axis of the cutting area; for the maintenance of the control cabinet: the control cabinet is the central control center, and the filter grilles and filters inside often generate dust. We have to clean up the dust in time; for the dust on the bracket, we can use a hair dryer to remove it.

When the automatic wire cutting machine is in operation, we have to check the damage of the felt on the head moving guide rail, the condition of the pinion of the beam frame, and the wear of the belt.

The automatic wire cutting machine has the characteristics of advanced technology, complex structure, and high automatic intelligence, so our maintenance requirements for the automatic wire cutting machine are generally very high.